Lighting

Updated and more secure clothing clip for mounting CatEye safety lights.

- Rack mount bracket only - Fits TL-L225 taillight

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

Mounting bracket for MSW front White Bat Headlight. - Includes 1 front mounting bracket

Replacement bracket for Pico and Tigermoth lights. - Includes 1 front bracket, 1 rear bracket, and 2 mounting straps

- Mounts Beamer and Blaze 1/2W lights to a helmet - Compatible with Beamer 1, Beamer 3, Beamer 5, Blaze 1/2W and Blaze 2W Micro, Blaze 140 SL, Blaze 180 USB - Increased weight and length of Blaze 300, 500, and 650 USB lights may cause awkward mounting on helmet

Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.

SP-12 Flex-Tight Seatpost Bracket for most CatEye taillights

- Quick Strap mounts, adjusts or removes in seconds without tools - Fits 25.4-35mm handlebars - Compatible with Blazes, Beamers, 1200 and Super Spot

- Compatible with all Blaze headlights, Beamer 1/3/5, 1200, Dual Spot, and Bright Spot bike headlights - Fits 25.4 – 31.8mm handlebars

- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot

Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks

The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post. - Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot. - UV proof rubber strap - Compatible with every PDW tail light except Asteroid and Fenderbot

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light - Designed specifically for aero seat posts - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal

- Compatible with seatpost diameter 20mm-36mm - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal - Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis, Superflash Micros and Blinky Safety rear light

- Simplistic safety light designed to be seen - Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars - 3 modes including 1 steady and 2 flashing modes - Powered by 2 CR2032 batteries - Lumens: 6

Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.

Put it on your handlebars, put it on your fork leg, put it anywhere—Sunlite's Griplite goes everywhere! This powerful little light has 2 LEDs and runs for a whopping 100 hours! It has steady and flashing modes and is housed in a water-resistant body.

• 2 bright Nichia LEDs • Uses 2 CR 2032 lithium batteries (included) • 100 hour run time • 3 modes: 2 flashing and 1 steady • Water-resistant silicone body

• 2 bright Red LEDs • Includes 2 (CR 2032) lithium batteries • 100 hour run time • 3 mode (2 flashing modes & steady mode) • Water resistant silicone body

Sunlite's HL-K100 Headlight is a great light at a great price. It sports a super-bright Krypton bulb housed in a tough, water-resistant body so it's perfect for commuting year round. A no-tools-required quick-release handlebar mount is included, too.

Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.

Optional Accessory Saddle Rail Mount Bracket for most CatEye taillights.

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)