Gear

The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.

- Size: 29 x 1.9 – 2.3 - 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 622 / road / 29" , 630 / 27" - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 673g

SRAM's X0 conversion caps are the ticket for converting your X0 hubs to a different axle type.

Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened

Wheel Conversion Caps for Zipp 77/177 Disc hubs. Converts your Zipp 77 or 177 hubs to nearly any frame standard.

- Size: 27.5 x 2.0 – 2.25 - 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 584 / 650b / 27.5" - ISO Width: 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

Endurance formula lasts twice as long as standard Orange Seal. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/8-inch, and slices up to 1/2-inch with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients

- Kenda model K40 - Intended for street use

- ISO Diameter: 406 / 20" BMX - Wall Thickness: 0.9mm - Tube Compound: Butyl - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

Front and rear BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness

Giant's thorn tubes use thicker rubber to prevent some flats and punctures.

The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples

These are no ordinary bicycle tubes! These extra strong inner tubes stop flats for 2 years because there is Slime inside. - No more flats for 2 years! - Extra strong with Slime sealant inside - Instantly seals tread area punctures up to 1/8" (3mm) in size - Seals multiple punctures repeatedly - Non-toxic and non-flammable - Cleans up with water

- Valve: Presta - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

The Fat Bike Tube is just that, a tube built specifically for fat bikes. Tailored sizes perfectly suit the line of Bontrager fat tire models. Product details - 0.9mm wall thickness - Equipped with removable valve cores - Purchase 50 tubes to receive a full case - 35mm Schrader valve

- 2-ply rubber shield fits between tire and tube to prevent flats

We designed Teravail tubeless tape for no-hassle installation. Its slight stretch allows the tape to easily conform to your rims. The translucent material shows you exactly where the tape makes contact. It's tacky enough to prevent shifting but easy to pull up if needed, and it won't leave residue on your rims. - Teravail Tubeless Tape comes in a variety of widths to fit almost any rim. - Teravail Tubeless Tape is available in a variety of widths and roll lengths. - Ten-meter length is enough for a single layer on approximately four wheels

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

The Lizard Skins Tube Strap is an easy way to stow a spare tube. The minimally designed Tube Strap is a lightweight on-bike storage solution for any rider. This versatile strap is made to securely attach under seats and other locations on bike frames. - On-bike storage solution - Inner sleeve to compress a tube - Silicone strips for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 1.3oz (37g)

- The original tube for flat protection - Non-toxic and environmentally safe - Protects against punctures up to 1/8-inch

The Problem Solvers Presta Valve Extenders add 33 to 50mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders simply screw onto your Presta valves by hand.

These are no ordinary bicycle tubes! These extra strong inner tubes stop flats for 2 years because there is Slime inside. - No more flats for 2 years! - Extra strong with Slime sealant inside - Instantly seals tread area punctures up to 1/8" (3mm) in size - Seals multiple punctures repeatedly - Non-toxic and non-flammable - Cleans up with water

He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

- Replacement axle sets for MT-1100 hubs - Axle: QR

The CST Decade was designed for flatland BMX riding. - Smooth tread profile with no knobs to interfere with your feet while performing tricks

- AL6061 alloy tubeless Presta valve - Includes 2 O-rings, one standard profile and one aero profile, for an airtight seal on any rim - Removable valve core for installing sealant - Additional replacement valve cores sold separately - Sold individually

Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.

Kenda Kwest High Pressure Road tire is designed with a smooth rounded tread with large water dispersion grooves. - The Kwest High Pressure Road Recumbent tire is constructed of a steel bead and rates at a max of 100 PSI

If you load your bike with heavy cargo or need an extra bit of traction for an extended haul, the Tour Guide Tire is your beast of burden! Its shoulder-to-shoulder sipes, combined with a thick tread cap, and puncture protection equip this tire with reliability for conditions most cyclists would not attempt to conquer. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use